Spray booths & Painting chamber: AKFS Standart series

Spray booths & Painting chamber: AKFS Standart series embodies modern technological solutions for a car service workshop, greatly facilitating the painting and drying of cars or body parts. Painting and drying chambers of the AKFS Standart series is a complex of equipment designed for safe, quick and high-quality application, and later drying of the paintwork on the surface of various products.

Product type: Spray booths
Painting chamber
Series: AKFS Standart
Industry: For car service
Type of installation: On a special foundation

Download the questionnaire

Spray booths & Painting chamber: AKFS Standart series installed on a special foundation with built-in air exhaust channels. Air is heated with a diesel or gas burner.

Universal spray booth designed for car service workshops

In the paint-drying chambers of the AKFS Standart series, various primers, paints (including water-based), enamels, varnishes and other paints and varnishes are used

With the help of a special supply and exhaust ventilation system, a stream of clean air heated up to a predetermined temperature is constantly and uniformly fed into the working area.

AKFS Standart spray booth complies with international safety standards

  • Equipped with an automatic fire extinguishing system and made of non-combustible materials.
  • Fans and main elements of the ventilation system – have explosion-proof design.
  • The system of automatic protective blocking eliminates the possibility of supplying paint or compressed air to the spray devices in the event of a shutdown of ventilation.

Basic equipment

  • Set of wall panels 50mm thick;
  • Rolling gates;
  • Set of LED ceiling lights 4x18W;
  • Centrifugal ventilation unit, supply, with electric motor;
  • Centrifugal exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Damper for manual adjustment of air pressure in the chamber cabin;
  • Set of primary filters, discharge filters and feed;
  • Control panel with automation and control systems;
  • Pressure measuring instrument in a chamber cabin;
  • Ceiling construct with a set of ceiling filter frames;
  • Set of floor grates, max load – 800 kg / wheel;
  • Set of frames for emission filters;
  • Temperature controller;
  • Hour meter;
  • Timer to control the drying time;
  • Service doors for staff;

Technical specifications

For the basic configuration*







The internal size of the working area (LxWxH) 7х4х2,7 m 8,6х4,5х3 m
Entrance rolling gates (WxH) 3х2,7 m 3х2,9 m
Doors for staff (WxH) 0,7х1,9 m

Power of ventilation units

Exhaust ventilation unit 5,5 kW 7,5 kW 7,5 kW 11 kW
Sailing ventilation unit 7,5 kW 11 kW 11 kW 15 kW
Air productivity 22000 m³/h 26000 m³/h 26000 m³/h 31000 m³/h
Air refresh rate ≥290 set/h ≥340 set/h ≥220 set/h ≥260 set/h
Air speed 0,22 m/sec 0,26 m/sec 0,21 m/sec 0,25 m/sec


Energy saving lights LED Т8, 1200х4×18 8 pcs 10 pcs

Air temperature in the working area

Painting mode 16-24°С
Drying mode 20-80°С


Fireproof Sandwich Panel Thickness 50 mm

Floor grilles

2 rows, maximum load 800 kg/wheel

Power of burners***

Diesel burner 200 kW 310 kW 310 kW 420 kW
Gas-burner 200 kW 300 kW 300 kW 310 kW


Power supply 3 phase/380 V/ 50 Hz
Total electricity consumption 13,6 kW/h 19,7 kW/h 19,7 kW/h 26,7 kW/h

*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes.

**- The external dimensions of the chamber depend on the type and location of the ventilation unit.

***- The cameras of the AKFS Standart series are equipped with a gas or diesel burner (optional). The amount of fuel consumed depends on the ambient temperature.