Spray booths & Painting chamber: AKFS Diagonal series

AKFS Diagonal series are embodies modern technological solutions for a car service workshop, greatly facilitates the painting and drying of cars or body parts.
Painting and drying chambers of the AKFS Diagonal series is a complex of equipment designed for safe fast and high-quality application, and later drying, of a paintwork on the surface of various products.

Product type: Painting and drying chambers
Series: AKFS Diagonal
Industry: For car service
Type of instalation: On a flat floor

Download the questionnaire

Spray booths & Painting chamber: AKFS Diagonal series – are installed on a flat floor, without a special foundation base with air ducts. Quick-assembly design, in case of need for changing the location of the camera, is easily mounted in a new place.

Designed specifically for auto-service shops

For the use of various primers, paints (including water-based), enamel, varnishes and other paints and varnishes

The spray booths AKFS Diagonal series consume significantly less energy and are economical to maintain (thanks to the smaller filter area). The diagonal direction of air movement in the chamber provides a high air velocity with a lower air flow.

With the help of a special supply and exhaust ventilation system, a stream of clean, heated air is constantly and evenly fed into the working area. Air is heated with a diesel or gas burner.

Painting and drying chambers of the AKFS Diagonal series comply with international safety standards and state labor protection standards:

  • equipped with an automatic fire extinguishing system;
  • made of non-combustible materials;
  • fans and main elements of the ventilation system are explosion proof.

The cameras are equipped with an automatic protective locking system, which eliminates the possibility of supplying paint or compressed air to the spray devices, in case the ventilation stops working.

Basic equipment

  • Set of wall panels;
  • Rolling gates;
  • Set of ceiling lights 4x18W;
  • Diesel or gas burner;
  • 4-way stainless steel heat exchanger;
  • Centrifugal ventilation unit, supply, with electric motor;
  • Centrifugal exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Damper for manual adjustment of air pressure in the chamber cabin;
  • A set of pre-filters, discharge filters and feed;
  • Control panel with automation and control systems;
  • Pressure meter for monitoring the pressure in the camera cabin;
  • Ceiling construct with a set of ceiling filter frames;
  • Ventilation channel of an emission (Wall with a filter);
  • Set of frames for emission filters;
  • temperature regulator;
  • Hour meter;
  • Timer to control the drying time;
  • Service doors for staff.

Technical specifications

For the basic configuration*






The internal size of the working area (LxWxH) 7х4х2,7 м 8,6х4,5х3 м 15х6х5 м
Entrance rolling gates (WxH) 3х2,7 м 4,5х4 мм
Doors for staff (WxH) 0,65х1,9 м

Power of ventilation units

Exhaust ventilation unit 5,5 кВт 7,5 кВт 7,5 кВт
Sailing ventilation unit 7,5 кВт 7,5 кВт 15 кВт
Air productivity 16000 м³/ч 22000 м³/ч 27000 м³/ч
Air speed 0,30 м/с


Energy saving lights LED Т8, 1200х4×18 8 pcs 10 pcs 18 pcs

Air temperature in the working area

Painting mode 16-24 °С
Drying mode 20-80 °С


Fireproof Sandwich Panel Thickness 50 мм

Burner heat output***

Diesel burner 40-160 кВт 80-200 кВт 115-310 кВт
Gas-burner 60-170 кВт 85-200 кВт 115-330 кВт


Power supply 3 фазы/380 В/ 50 Гц
Total electricity consumption 13 кВт/ч 15 кВт/ч 23 кВт/ч

*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes.

**- The external dimensions of the chamber depend on the type and location of the ventilation unit.

***- The cameras are equipped with a diesel and gas burner, at the choice of the customer.