Industrial painting and drying chambers: IKFS series

The IKFS series is an accurate, synchronized set of equipment that creates the perfect microclimate for safe, fast and high-quality application of paintwork. It embodies modern technological solutions for metal workshops. Increases the effectiveness of paint work.

Product type: Spray booths
Painting chamber
Series: IKFS
Industry: For metal structures
For railway cars
For defense equipment
For agricultural machinery

Download the questionnaire

Industrial painting and drying chambers: IKFS series is a system of synchronized painting equipment for industrial companies. Increases the effectiveness of paint work. It creates safe and comfortable working conditions for workers.

to Metal workshop

For primers, paints, enamel and varnishes

The performance of the spray booths of the IKFS series, for trains and trucks, will differ, depending on the object of painting, its quantity and the features of the preparation, painting and drying techniques. It can be equipped with automatic painting systems (full or partial).

Conform to international safety standards

  • Equipped with automatic fire extinguishing system;
  • Made of non-combustible materials;
  • Eradication of fans and main elements of the ventilation system;
  • Automatic safety locking system – eliminates the possibility of supply of paint or compressed air to the spray devices, in the event of termination of ventilation.

Basic equipment

  • Set of wall panels;
  • Swing gates;
  • Set of ceiling lights 4x18W;
  • Set of wall lights 2x18W;
  • Electric heat exchanger or diesel / gas burner (optional);
  • Supply ventilation unit with electric motor;
  • Exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Damper for manual adjustment of air pressure in the chamber cabin;
  • A set of filters ejection, feed and previous;
  • Control panel with automation and control systems;
  • Pressure meter for monitoring the pressure in the camera cabin;
  • Ceiling construct with a set of ceiling filter frames;
  • Set of floor grates, max load – 800 kg / wheel;
  • Set of frames for emission filters;
  • Pressure sensors in the chamber;
  • Temperature controller;
  • Hour meter;
  • Timer to control the drying time;
  • Service doors for staff.

Technical specifications

For basic configuration*






The internal size of the working area (LxWxH) 12х5х5 m 18х6х6 m 24х6х6 m
Gate Size (WxH) 4,2х4 m 4,8х4,5 m
Doors for staff (WxH) 0,8х2 m


Power exhaust ventilation unit 2х11 kW 3х11 kW 4х11 kW
Power tidal ventilation unit 2х15 kW 3х15 kW 4х15 kW
Air productivity 60000 m³/h 90000 m³/h 120000 m³/h
Air speed in the working area 0,25 m/sec
Air temperature 16-70 °С
Cabin Thermal Insulation Thickness 80 mm


Energy saving lights LED Т8, 1200х4 16 pcs 24 pcs 32 pcs
Energy saving lights LED Т8, 1200х2 10 pcs 16 pcs 20 pcs


Power supply 3 phase/380 V/ 50 Hz
Total electricity consumption 54 kW/h 80 kW/h 107 kW/h
Heat exchanger power consumption 60-180 kW/h 90-270 kW/h 120-360 kW/h
Thermal power of gas burners 210-840 kW 305-1260 kW 420-1640 kW
Thermal power of diesel burners 390-840 kW 585-1260 kW 780-1680 kW

*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes. **- The external dimensions of the chamber depend on the type and location of the ventilation unit. ***- The amount of fuel consumed depends on the outside temperature. In the basic configuration, air heating can occur using an electric heat exchanger or gas or diesel burner at choice.