Painting complex: FSC series for a painting plot on a tree. Ecological energy solution. The air in the working area is heated using an electric heat exchanger. High rates of efficiency. Painting and drying chambers – separated. It is installed on a flat floor.
to Wood workshop
For primers, paints, enamel and varnishes
Painting and drying technologies – divided into two independent chambers, with a common wall. Equipped with sliding gates, with moving and fixing systems. Power section with powerful hood and multi-stage filter system.
According to international safety standards
Equipped with an automatic fire extinguishing system;
Made of non-combustible materials;
Explosion-proof design of fans and basic elements of the ventilation system;
System of automatic protective blocking – excludes the possibility of supplying paint or compressed air to circular devices in the event of a ventilation interruption.
- Set of wall panels 50 mm thick;
- Entrance gate;
- Adjacent gate;
- Set of ceiling lights 4x18W;
- Diesel, gas burner, electric heat exchanger (one for customer choice);
- 4-way stainless steel heat exchanger;
- Supply centrifugal ventilation unit, with electric motor;
- Damper for manual adjustment of air pressure in the spray booth;
- Set of discharge, feed and previous filters;
- Control panel with automation and control systems;
- Pressure meter for monitoring the pressure in the camera cabin;
- Ceiling construct with a set of ceiling filter frames;
- Exhaust ventilation cabinet АСС-2,5;
- Set of emission filter frames;
- Temperature controller;
- Hour meter;
- Timer for monitoring drying time.
For basic configuration*
|External size of the complex (LxWxH)||10х5,5х2,9 m|
|Inner chamber size (LxWxH)||4х4х2,4 m||6х4х2,4 m|
|Entrance gate (WxH)||2,4х2 m||2,4х2 m|
|Interchamber gates (WxH)||1,2х2 m|
|Air performance||until 12000 m³/h||until 6000 m³/h|
|Chamber air velocity||0,28 m/sec||0,14 m/sec|
|Air exchange in the cab||more 200 set/hour||more 100 set/hour|
|Temperature (set by the operator)||16-24 °С||16-30 °С|
|For electric heat exchanger||18-54 kW/h||13,5-40,5 kW/h|
|For diesel burner||7-13 kg/h||3,4-7,2 kg/h|
|For gas burner||6,4-18 m³/h||3,7-8,9 m³/h|
Burner heat output
|Diesel burner||80-160 kW||34,4-73,1 kW|
|Gas-burner||60-170 kW||35-85 kW|
|Energy saving lights LED Т8, 1200х4×18||8 set||4 set|
|Power supply||3 phase/380V/ 50Hz|
|Total electricity consumption||8 kW/h||4 kW/h|
*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes.
**- The external dimensions of the chamber depend on the type and location of the ventilation unit.
***- The amount of fuel consumed depends on the ambient temperature.