Spray booths & Painting chamber: AKFS Standart series

The AKFS Standart series is precision synchronized equipment that creates the perfect microclimate. For safe fast and high-quality application of paintwork. It embodies modern technological solutions for a car service workshop. Increases the effectiveness of paint work.

Product type: Spray booths
Painting chamber
Series: AKFS Standart
Industry: For car service
Type of installation: On a special foundation

Download brochure

Download the questionnaire

Spray booths & Painting chamber (Painting and drying chamber: AKFS Standart series) – a solution for increasing the productivity of paint work, for car service workshops. Long-lasting reliable design. Heated air using a diesel or gas burner. It is installed on a special foundation with ventilation ducts.

to Car workshops

For primers, paints, enamel and varnishes

The perimeter of the working area is illuminated by energy-saving powerful LED lamps. The temperature is regulated from the control panel (within 16-24 ° C during the painting process and 20-80 ° C during the drying process). Powerful exhaust system, provides a constant stream of clean, warm air. The spray booth is equipped with an entrance gate and a door for staff.

Conform to international safety standards

  • Equipped with automatic fire extinguishing system;
  • Made of non-combustible materials;
  • Eradication of fans and main elements of the ventilation system;
  • Automatic safety locking system – eliminates the possibility of supply of paint or compressed air to the spray devices, in the event of termination of ventilation.

Basic equipment

  • Set of wall panels 50mm thick;
  • Entrance gate;
  • Set of ceiling lights 4x18W;
  • Diesel or gas burner;
  • 4-way stainless steel heat exchanger;
  • Centrifugal ventilation unit, supply, with electric motor;
  • Centrifugal exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Damper for manual adjustment of air pressure in the chamber cabin;
  • A set of filters ejection, feed and previous;
  • Control panel with automation and control systems;
  • Pressure meter for monitoring the pressure in the camera cabin;
  • Ceiling construct with a set of ceiling filter frames;
  • Set of floor grates, max load – 800 kg / wheel;
  • Set of frames for emission filters;
  • Temperature controller;
  • Hour meter;
  • Timer to control the drying time;
  • Service doors for staff;
  • Frequency converter of an air handling unit;
  • Programmable logic controller.

Technical specifications

For the basic configuration*

Model

AKFS-S-7-22

AKFS-S-7-26

AKFS-S-9-26

AKFS-S-9-31

Dimensions**

The internal size of the working area (LxWxH) 7х4х2,7 m 8,6х4,5х3 m
Entrance rolling gates (WxH) 3х2,7 m 3х2,9 m
Doors for staff (WxH) 0,7х1,9 m

Power of ventilation units

Exhaust ventilation unit 5,5 kW 7,5 kW 7,5 kW 11 kW
Sailing ventilation unit 7,5 kW 11 kW 11 kW 15 kW
Air productivity 22000 m³/h 26000 m³/h 26000 m³/h 31000 m³/h
Air refresh rate ≥290 set/h ≥340 set/h ≥220 set/h ≥260 set/h
Air speed 0,22 m/sec 0,26 m/sec 0,21 m/sec 0,25 m/sec

Lighting

Energy saving lights LED Т8, 1200х4×18 8 pcs 10 pcs

Air temperature in the working area

Painting mode 16-24°С
Drying mode 20-80°С

Walls

Fireproof Sandwich Panel Thickness 50 mm

Floor grilles

2 rows, maximum load 800 kg/wheel

Power of burners***

Diesel burner 200 kW 310 kW 310 kW 420 kW
Gas-burner 200 kW 300 kW 300 kW 310 kW

Electricity

Power supply 3 phase/380 V/ 50 Hz
Total electricity consumption 13,6 kW/h 19,7 kW/h 19,7 kW/h 26,7 kW/h

*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes. **- The external dimensions of the chamber depend on the type and location of the ventilation unit. ***- The cameras of the AKFS Standart series are equipped with a gas or diesel burner (optional). The amount of fuel consumed depends on the ambient temperature.