Spray booths & Painting chambers: AKFS FlatFloor series

The AKFS FlatFloor series is precision synchronized equipment that creates the perfect microclimate. For safe fast and high-quality application of paintwork. It embodies modern technological solutions for a car service workshop. Increases the effectiveness of paint work.

Product type: Painting and drying chambers
Series: AKFS FlatFloor
Industry: For car service
Type of installation: On a flat floor

Download brochure

Download the questionnaire

Spray booths & Painting chambers (Painting and drying chamber: AKFS FlatFloor series) – a solution to increasing the productivity of paint work, for auto repair shops. Quick assembly design. In case of need, the camera is easy to decompose and assemble, in a new place. Heated air using a diesel or gas burner. Mounted on a flat floor, without foundation with air ducts.

to Car workshops

For primers, paints, enamel and varnishes

The perimeter of the working area is illuminated by energy-saving powerful LED lamps. The temperature is regulated from the control panel (within 16-24 ° C during the painting process and 20-80 ° C during the drying process). Powerful exhaust system, provides a constant stream of clean, warm air. The spray booth is equipped with an entrance gate and a door for staff.

Conform to international safety standards

  • Equipped with automatic fire extinguishing system;
  • Made of non-combustible materials;
  • Eradication of fans and main elements of the ventilation system;
  • Automatic safety locking system – eliminates the possibility of supply of paint or compressed air to the spray devices, in the event of termination of ventilation.

Basic equipment

  • Diesel or gas burner (at choice);
  • 4-way stainless steel heat exchanger;
  • Bypass air ducts insulated;
  • Centrifugal ventilation unit, supply, with electric motor;
  • Centrifugal exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Ceiling construct with a set of ceiling filter frames;
  • A set of pre-filters, discharge filters and feed;
  • Set of frames for emission filters;
  • Set of wall panels 50mm thick;
  • Entrance gate;
  • Service doors for staff.
  • Set of LED ceiling lights 4x18W;
  • Control panel with automation and control systems;
  • Pressure measuring instrument in a chamber cabin;
  • Temperature controller;
  • Hour meter;
  • Timer to control the drying time;

Technical specifications

For basic configuration*







The internal size of the working area (LxWxH) 7х4х2,7 m 8,6х4,5х3 m
Entrance gate (WxH) 3х2,6 m 3х2,9 m
Doors for staff (WxH) 0,7х1,9 m

Power of ventilation units

Exhaust ventilation unit 5,5 kW 7,5 kW 7,5 kW 11 kW
Sailing ventilation unit 7,5 kW 11 kW 11 kW 15 kW
Air productivity 22000 m³/h 26000 m³/h 26000 m³/h 31000 m³/h
Air refresh rate ≥290 set/h ≥340 set/h ≥220 set/h ≥260 set/h
Air speed 0,22 m/sec 0,26 m/sec 0,21 m/sec 0,25 m/sec


Energy saving lights LED Т8, 1200х4×18 8 pcs 10 pcs

Air temperature in the working area

Painting mode 16-24 °С
Drying mode 20-80 °С


Fireproof Sandwich Panel Thickness 50 мм

Burner power***

Diesel burner 200 kW 310 kW 310 kW 420 kW
Gas-burner 200 kW 300 kW 300 kW 330 kW


Power supply 3 phase/380 V/ 50 Hz
Total electricity consumption 13,6 kW/h 19,6 kW/h 19,7 kW/h 26,7 kW/h

*- Characteristics designed for execution as standard. Camera performance increases significantly when using optional accessory nodes. **- The external dimensions of the chamber depend on the type and location of the ventilation unit. ***- The cameras of the AKFS Flatfloor series are equipped with a gas or diesel burner (optional). The amount of fuel consumed depends on the ambient temperature.