Spray booths & Painting chamber: AKFS Diagonal series

The AKFS Diagonal series is precision synchronized equipment that creates the perfect microclimate. For safe fast and high-quality application of paintwork. It embodies modern technological solutions for a car service workshop. Increases the effectiveness of paint work.

Product type: Painting and drying chambers
Series: AKFS Diagonal
Industry: For car service
Type of instalation: On a flat floor

Download the questionnaire

Spray booths & Painting chamber (Painting and drying chamber: AKFS Diagonal series) – budget solution, consumes significantly less energy. Quick assembly design. In case of need, the camera is easy to decompose and assemble, in a new place. Heated air using a diesel or gas burner. Mounted on a flat floor, without foundation with air ducts.

to Car workshops

For primers, paints, enamel and varnishes

The perimeter of the working area is illuminated by energy-saving powerful LED lamps. The temperature is regulated from the control panel (within 16-24 ° C during the painting process and 20-80 ° C during the drying process). Powerful exhaust system, provides a constant stream of clean, warm air. The spray booth is equipped with an entrance gate and a door for staff.

Conform to international safety standards

  • Equipped with automatic fire extinguishing system;
  • Made of non-combustible materials;
  • Eradication of fans and main elements of the ventilation system;
  • Automatic safety locking system – eliminates the possibility of supply of paint or compressed air to the spray devices, in the event of termination of ventilation.

Basic equipment

  • Diesel or gas burner (optional);
  • 4-way stainless steel heat exchanger;
  • Centrifugal ventilation unit, supply, with electric motor;
  • Centrifugal exhaust ventilation unit, with electric motor;
  • Gate device with pneumatic drive;
  • Damper for manual adjustment of air pressure in the chamber cabin;
  • Set of wall panels;
  • A set of pre-filters, discharge filters and feed;
  • Ceiling construct with a set of ceiling filter frames;
  • Ventilation channel of an emission (Wall with a filter);
  • Set of frames for emission filters;
  • Control panel with automation and control systems;
  • Pressure meter for monitoring the pressure in the camera cabin;
  • Timer to control the drying time;
  • Temperature controller;
  • Hour meter;
  • Set of ceiling lights 4x18W;
  • Entrance gate;
  • Service doors for staff.

Technical specifications

For the basic configuration*






The internal size of the working area (LxWxH) 7х4х2,7 m 8,6х4,5х3 m 15х6х5 m
Entrance rolling gates (WxH) 3х2,7 m 4,5х4 mm
Doors for staff (WxH) 0,65х1,9 m

Power of ventilation units

Exhaust ventilation unit 5,5 kW 7,5 kW 7,5 kW
Sailing ventilation unit 7,5 kW 7,5 kW 15 kW
Air productivity 16000 m³/h 22000 m³/h 30000 m³/h
Air speed 0,30 m/sec


Energy saving lights LED Т8, 1200х4×18 8 pcs 10 pcs 18 pcs

Air temperature in the working area

Painting mode 16-24 °С
Drying mode 20-80 °С


Fireproof Sandwich Panel Thickness 50 мм

Burner heat output***

Diesel burner 40-160 kW 80-200 kW 115-310 kW
Gas-burner 60-170 kW 85-200 kW 115-330 kW


Power supply 3 phases/380 V/ 50Hz
Total electricity consumption 13 kW/h 15 kW/h 23 kW/h

* – Characteristics calculated on execution in a basic complete set. Camera performance increases significantly when using optional auxiliary nodes. ** – The external dimensions of the chamber depend on the type and location of the ventilation unit. The AKFS Diagonal spray booth is equipped with a diesel or gas burner of your choice. *** – The cameras are equipped with a diesel or gas burner, at the choice of the customer.